The FR-8000 Fire Monitor provides an intelligent networked solution for the monitoring of up to 8 zones.
The system consists of the FR-8000 display (as seen above) one FR-100 8 zone sensor input unit, and up to two FEC-6 engine room relay units (optional). This system allows for the monitoring of up to two cylinder release doors and cylinder fill /empty switches.
The system communicates via a 2-wire network cable with a maximum cable length of 1000 meters.
FR-8000 DISPLAY UNIT: features include:
- Full indication from one central location on your boat.
- Visual indication of Fire or Fault.
- Audible indication of Fire or Fault.
- Isolate any zone.
- All zone names programmable e.g. (Saloon) (Engine Room) (Upper Deck) (Master Cabin).
- Backlight.
FR-100: Input module: Is the zone controller which managers the sensors. Features include:
- 8 separate zone inputs.
- Output Relay’s x 2.
- 10 A resistive @ 24VDC.
- Relay 1 & relay 2 close on Fire detection.
- Relay 1 opens when alarm is muted.
- Relay 2 opens when all zones are OK.
FEC-6: Is the engine room controller unit (optional). Features include:
- 6 relays.
- Output relay 1 to 4 = 10 A resistive @ 24VDC.
- Output relay 5 & 6 = 1 A resistive @ 30VDC.
- Relay 4 activated on a programmable timer.
- Relay 5 opens when alarm is muted.
- 4 inputs (for extinguisher cylinder empty/fill switches).
|
