|
The TC-8000 Controller provides an intelligent networked solution for the monitoring and control of up to eight tanks. The diagram (right) shows a typical system layout. The system consists of the TC-8000 display controller (as seen above) up to eight HT-100 or HT-100/P tank controllers and any
number of optional RD-800 repeater displays communicating via a 2-wire network cable with a maximum cable length of 1000 meters.
TC- 8000 DISPLAY CONTROLLER: Is a powerful tank monitor and control system.
• Full control from one central location on your boat.
• Visual indication of tank level, seacock position & pump status.
• Turn holding tank macerator pump on/off manually or automatically.
• Turn water maker on/off manually or automatically.
• Visual & audible tank full and fault alarms.
• Three modes of operation: manual, auto grey or auto all.
• Mode change is key switch selectable.
• Displays in Litres or Gallons and Percentage.
• Three display modes available. (see right).
• All tanks are name programmable giving tank location and type, e.g. Aft Port, Grey Tank.
HT-100 or HT-100/P: Is a controller which managers the tank pump, the electric seacock, tank high output and provides an input for the fluid level sensor.
|
